留学简历模板(加拿大留学个人简历英文模板)

加拿大留学个人简历是概括性介绍自己的经历的一篇文章，主要是把需要补充的，没有在其他文书材料中体现出来的东西，写在简历里。简历不同于个人陈述，它有着自己固定的格式和内容。和我一起来看看加拿大留学个人简历英文模板。

　Curriculum Vitae

　Name：Gender： Male

　Date of Birth：　Place of Birth： China

　Marital status： SingleLanguage： English， proficient

　Telephone：Email：

　Education Experience

　September 1989 - July 1993

　Department of Electrical Engineering， Shenyang Institute of Aeronautics

　* Majored in Radio Engineering

　* Won a third-class Award in the Contest of Technological Facture & Experimental Skills in Electronics and Electrician， for Students from the Colleges affiliated to the Ministry of Aeronautics & Astronautics

　*Masterful in analog circuit， power circuit， switching power circuit， operation and amplification； proficient in solving problems related to analog circuit.

* Bachelor of Engineering Degree obtained in July 1993

　September 1993 - July 1996

　Nanjing University of Aeronautics & Astronautics

　* Majored in Communication & Electrical System

　* Main field of research was contemporary communication circuit， especially on high efficiency， high frequency power amplifier （Class E and Class S）.

　*Instructed undergraduate students in their research on wide band frequency multiplier

　* My diploma thesis was The Electromagnetic Compatibility Testing System of an Airplane

　* Read extensively on electromagnetic compatibility and its testing， obtained a through knowledge on the test of electromagnetic compatibility， and on the solutions （methods and instrument） to the issues of electromagnetic compatibility. Familiar with the testing standards， especially the GJB and the MTL-STD

　* Master of Engineering Degree obtained in July 1996

　Work Experience

　January 1994 - December 1995

　* Chairted the research and development work in the Nanjing Leader Electronics Company

　* Independently developed 3 types of charging devices and management systems for telephones， LDJF-I， LDJF-II and LDJF-1， and their volume of sales exceeded a total of 5，000.

　* Became the Copartner and Chief Engineer of the company at the end of 1995

　January 1996 - August 1999

　Chief Engineer， Nanjing Leader Electronics Company

　* Hosted the refinement of HTD-80 Program Controlled Telephone Exchanger by adding an E & M trunk.

　*Primary designer of the HTD-120 Program Controlled Telephone Exchanger

　* Perfection of the SSC-2 Telecontrol System， which obtained the commercial approval from the Ministry of Electrical Power Resource

　*Took charge of the quality control and production of the company

　*Perfection of the FFT Algorithm Program for alternative current sampling in the SSC-2 System， which was used to measure harmonic wave

　* In the research and development processes， read extensively on production reliability and solved many problems related to production reliability and electromagnet compatibility

　* Designed the management board by using an Intel 80C188EB processor， studied the TC 2.0 Compiler and rewrote its startup code， and developed a locator and a simple debugging tool

　* Lead the development of the Supervision System for Petroleum Tanks， based on the SSC-2 System， for the Yangtze Petroleum Chemical Works

　* Chaired the development of the Data Collection Device for Electrical Power Charging System， which was not finished before my departure from the company

　* Retrieved a lot of literatures on field bus and real time operating systems， including CAN， Hart， Lonworks， ProfiBus， FF， Arcnet， Ethernet

　October 1999 - March 2000

　* Technological Center for Operation & Maintenance， the Beijing Telecommunication Administration

　* Tracing and research on Internet media technology

　* Developed a dial box

　March 2000 - October 2000

　Beijing OrientTech Network & Telecommunication Technology Ltd. Co.

　* Project Manager of the Automatic Call Distribution in a Call Center， and the Manager of the Hardware Department simultaneously

　* As the Head of the Research & Development Division， took charge of four projects， including ADSL （Asymmetric Digital Subscriber Line） Modem （PCI， USB）； ADSL Router； DSLAM with 16 ADSL ports and one 100 M Ethernet Port； migration of the RouteWare Protocol Stack

　Skills & Capability

　* Masterful in electronic circuit； MCS 51， MCS 96， X86 series； ADSL， MSDSL， HDSL， E 1； industrial supervision and control； program controlled telephone exchanger and TCP/IP

　* A thorough knowledge on MPC 8XX， MPC 82XX and field bus

　* As far as software ability is concerned， I am good at assembler of MCS 51， X86； PL/M-51， PL/M-96， PL/M-86； Turbo C， and visual C++

　Position Desired

　* Department manager

　* Project manager

　* Research & development engineer

　* Advanced field engineer

　以上即是出国留学个人简历英文模板，希望能帮助到大家。

1. 姓名。力求与各种学历证明的姓名相同，如有更名的情况，务必在公证时予以声明，并附上公证书。

　2. 性别。

　3. 出生年月日及地点。力求与各类学历证明的出生年月日一致，出生地点写明国别和省别。

　4. 国籍。

　5. 婚否。应分为未婚、已婚、丧偶、独身四种状况。

　6. 现在工作单位及详细通信地址。

　7. 个人受教育经历。包括大学、硕士研究生阶段的在读时间，所在大学的名称、专业和所获学位;参加工作后的受教育经历，主要是指脱产接受专门的进修、培训或学习。

　8. 个人从事专业的经历。填写专业经历应力求抓住重点，突出研究方向;担任教学工作的可列出主讲、助讲的课程名称;担任研究工作的可列出参加各个研究项目的课题名称。

　9. 有何着作、论文或研究成果。个人的论文、着作和研究成果要分门别类列出，并一定要与个人专业经历相一致。所列着作要注明名称、出版年月、出版单位。所列论文要注明论文题目，刊载的杂志或期刊名称、期号、语种;对于在学术会议上发表的文章还要注明学术会议的名称、召开的时间和地点等等。如果其中有被外国学者评论过的，附上刊载评论文章的杂志名称及时间。

　10. 外语水平。注明参加TOEFL、GRE等考试时间、地点及成绩。若申请者掌握多门外语，则要一一注明语种 并说明熟练程度。

　11. 参加何种学术团体，得到何种荣誉。学术团体一般应是省、市或行业一级以上的专业学术团体，在学术团体中所担任职务可予以注明：荣誉主要是指在专业、技术研究方面获得的奖励和荣誉，要注明获奖名称、颁奖时间和颁奖单位。

　12. 拟申请的大学和导师的姓名。可根据申请者查询到的资料予以注明，需注意按照每个单位、每位导师给一份简历的原则，即在同一份简历中不必注明全部想要联系的单位或导师。

　13. 拟进行的研究方向和希望从事研究的题目。国外院校的专业面一般较宽，要根据国外情况，力求专业面与其一致;研究课题可根据自己的研究兴趣和需要，同时也要尽量考虑对方的条件。简历打印。上述项目如遇缺项可不必撰写，只需将下一项内容提前即可。简历的字迹要求工整、清楚。既不要言过其实，又必须充分反映自己的实际水平。